Welcome to Albany Music & Sound Sound Systems Portable, Installation Accessories, Mixers, Power Amplifiers Microphones, Processors LED Special Effects Stage Lighting 805 Burkhart St., SE Albany, OR 97321 541-967-8293
Follow us on Facebook...an easy way for us to keep you up to date We are posting new items and daily specials. Please check back often	Layaway now for the Christmas. 25% down. balance due by 12/24. We can help you keep that hard to hide item a surprise by keeping it here, even if you pay in full. Have peice of mind by knowing you have your shopping done and we can keep the instrument, amplifier or drum set here for you until 12/24.

Blowout List: One each. Floor model Special
American DJ Reflex Pulse LED Special Effects Light $99.00
American DJ Sunray Tri LED mirror ball effect light $99.00
Peavey TLM2X Monitor Speaker $169.99
Peavey Sanctuary Series SSE12 Natural Finish $249.00 Each (sold as pair only)
Peavey Sanctuary Series SSE6 Natuarl Finish $189.00 Each (sold as pair only)

• Stereo Mode: 4 ohms: 500W RMS x 2
• Stereo Mode: 8 ohms: 300W RMS x 2
• Bridge Mode-Mono: 8 ohms: 1000W RMS
• Inputs: XLR, 1/4 inch and barrier strip
• Detented input gain control
• Binding post and Speakon output connectors
• Separate Speakon mono bridge output
• Mode switch for stereo or bridge operation
• Low-cut filter switch for 40Hz low cut filter
• Thru/low output jacks and high output jacks
• LED indicators for input signal, DDT and power
• Peavey's famous DDT compression system
• Total Harmonic Distortion: Less than 0.03% 20Hz to 20kHz, 10dB below rated power in stereo mode both channels driven
• Frequency Response: 20Hz to 20kHz
• Damping Factor: greater than 300
• Hum and Noise: 100dB
• Rackspaces: 2U

• Stereo Mode: 4 ohms: 300 Watts RMS x 2
• Stereo Mode: 8 ohms: 180 Watts RMS x 2
• Bridge Mode-Mono: 8 ohms: 600 Watts RMS
• Total Harmonic Distortion: Less than 0.03% 20Hz to 20kHz stereo mode both channels driven 10% below rated power
• Inputs: XLR, 1/4 inch, and barrier strip
• Detented input gain control
• Binding post and Speakon output connectors
• Separate Speakon mono bridge output
• Mode switch for stereo or bridge operation
• Low-cut filter switch for 40Hz low-cut filter
• Thru/low output jacks and high output jacks
• LED indicators for input signal, DDT9TM, & power
• Peavey's famous DDT compression system
• Frequency Response: 20Hz-20kHz
• Damping Factor: greater than 300
• Hum and Noise: 100dB
• Rack Spaces: 2U

The rack mountable PV 215EQ is a dual 15-band 1/3-octave graphic equalizer incorporating Peavey's legendary low-noise, low-distortion design. Ruggedly constructed, the PV 215EQ lets you select between 6 dB or 12 dB cut or boost over frequencies ranging from 25Hz to 16kHz. Low cut filter switch with status LED helps remove rumble from open mics. Other features include balanced inputs and outputs and bypass switches.

Peavey Peavey pv 215 eq graphic equalizer Features:

• 1 RU dual 15-band stereo
• Switchable 12-band or 6 dB boost/cut range
• 80 Hz 24 dB low cut filter
• XLR balanced I/O
• Output level LEDs
• Bypass switch with status LED
• 45 mm center-detent control sliders

• 4 RQ (reference-quality) low noise microphone inputs
• USB jack
• Channels 3 and 5 with stereo line inputs
• 3-band EQ on channels 1-2
• LED clip, signal
• 1 effects send with stereo output
• 1 stereo effects returns
• Control room output
• Global 15 volt phantom power, tape to control room and tape to mix assignments
• Stereo Output 1/4 inch balanced connectors
• Rugged console design

• 4 RQ (reference-quality) low noise microphone inputs
• USB jack
• channels 5/6 and 7/8 with dual switchable stereo line inputs
• 3-band EQ on all channels
• LED clip, signal, 1 pre-fader monitor send
• 1 post-fader effects send with stereo output
• Control room output
• Global 48 volt phantom power, tape to control room and tape to mix assignments
• Stereo output 1/4 inch balanced connectors
• Rugged console design

The PV® 10 compact mixer offers value and easy-to-use features. Reference-quality mic preamps with an astonishingly low 0.0007% THD make the PV 10 mixer excellent for live sound or project studio recording. The PV 10 mixer includes three-band EQ, effects send and monitor send on each channel. With six mono and two stereo channels, the PV 10 offers a total of eight inputs. The master section includes 48 volt phantom power, built-in digital effects, effects send and return, assignable tape input and a unique master contour EQ that helps sweeten the mix. Dual XLR and 1/4 inch outputs allow the PV 10 to easily connect with other equipment. Sleek metal design adds strength, durability and looks like no other mixer in its class. Rackmount kit available.

• 300W per channel @ 4 ohms
• 8 new, ultra-low-noise mic preamps
• 10 line inputs
• 48-volt phantom power
• 3-band EQ on each channel
• Monitor send and effects send on each channel
• 25dB pad on channels 1-6
• Signal and clip indicators on each channel
• Dual Main or Main/Monitor power amp mode switch
• Dedicated 7-band graphic EQ for mains and monitors with feedback locater
• DDT speaker protection
• DSP-based effects with parameter contro
• Channel mute switch
• Rugged plastic case
• Combination Neutrik© Speakon© and 1/4" outputs
  

The XR 8600D powered mixer include many of the latest technological developments from Peavey engineering. Incorporating a pair of 600 Watt amplifiers, dual 7-band EQ, digital effects, FLS® (Peavey's award-winning Feedback Locating System), DDT™ speaker protection and a host of other features, these compact powered mixers are perfect for any application.

Audio-Technica’s 700 Series Freeway wireless delivers professional features and sound quality unheard of in its class. These easy-to-use wireless systems feature eight selectable frequency-coordinated channels, diversity operation for increased range/reliability, automatic frequency scanning, Tone Lock™ squelch and more. 700 Series Freeway systems come equipped with your choice of handheld, headworn, or lavalier microphones; or choose a system designed for guitar hookup. For multiple-mic applications, as many as eight systems may be used together. 8 selectable frequency-coordinated UHF channels
Use up to 8 simultaneous systems—all channels compatible
Automatic frequency scanning
Diversity operation for increased range/reliability
LED Channel display plus Antenna, AF Peak indicators
Balanced XLR and unbalanced ¼” output connectors
Tone Lock™ squelch system eliminates interference when transmitter is off
UniPak® transmitter features: separate guitar/mic trim control, switchable high/low RF power, internal channel selector, multi-color battery/power indicator, AA operation
Handheld transmitter features: variable trim control, internal channel selector, multi-color battery/power indicator, AA operation
Freeway body-pack systems are compatible with all Audio-Technica Wireless Essentials® microphones and cables

CONSUMER ALERT
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.

CONSUMER ALERT
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.

CONSUMER ALERT
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.

• Neodymium iron boron magnet
• Cardioid unidirectional polar pattern
• Ultrahigh sensitivity
• Black rubberized paint finish
• Swivel adapter
• Protective pouch

• Unidirectional cardioid pattern
• On/off switch
• Steel casing
• Low handling noise
• Low-gloss black finish
• Includes XLR cable
• Available in Low or High Impedence
• with appropriate cable

• Condenser
• Cardioid pattern
• Side address
• 16mm low-mass diaphragm
• 20Hz-20kHz frequency response
• 144dB SPL handling
• Rugged body
• Pivoting, threaded stand mount

• Side-address studio condenser with USB digital output (Windows and Mac compatible)
• Crystal-clear, natural sound for podcasting, home studio recording, field recording, and voiceover use
• Custom-engineered low-mass diaphragm provides extended frequency response and superior transient response
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• Low self-noise perfectly suited for sophisticated digital recording equipment
• Includes tripod desk stand, pivoting stand mount, USB cable & storage pouch

The 10-channel Audio-Technica ATW-2192a 2000 Series Wireless System is frequency-agile and suitable for a variety of UHF wireless applications. You'll value the ATW-2192a at live performances, fixed installations, and as a public address system. The ATW-2192a is a natural for A/V rental houses and places of worship.

Part of Audio-Technica's second-generation 2000 Wireless Series, the ATW-2192a system offers all the advantages of high-quality, professional wireless at an extremely affordable price. Professional features include 2 available frequency bands and switchable antenna power, plus a MicroSet Submachine Omnidirectional Condenser Headworn Microphone.

Offering 10 selectable channels in 1 of 2 UHF frequency ranges and True Diversity UHF wireless technology, Audio-Technica's ATW-2192a boasts automatic frequency scanning. At the touch of a button, AFS automatically determines and sets the best available frequency.

The ATW-2192a wireless system's 10 channels may be used together without any frequency coordination problems or group selection issues. The Audio-Technica ATW-2192a also incorporates A-T's digital Tone Lock squelch plus an easy-to-read LCD display.

Audio-Technica ATW-2192a 2000 Series Headworn Omni Wireless System Features:

• Includes ATW-R2100a receiver, ATW-T210a UniPak Bodypack Transmitter, and a MIcroSet Headworn Microphone
• Serious advances in affordable professional wireless
• Clear sound quality and rock-solid, dependable performance
• Automatic frequency scanning
• 10 compatible user-switchable channels in one of two UHF frequency ranges
• Antenna power available for powered antennas & other in-line RF devices
• True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
• Tone Lock tone squelch system fights interference
• Rugged metal half-rack receiver with soft-touch controls and LCD display
• Balanced XLR and unbalanced 1/4" output jacks enable use with a wide variety of audio gear
• Switchable transmitter power output with high and low settings offered
• Includes rack-mount kit and detachable UHF antennas
• Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver
  
  MicroSet Subminiature Omnidirectional Condenser Headworn Microphone
• Handles high sound pressure levels with ease
• Extremely intelligible natural audio
• Inconspicuous, lightweight headset with capsule diameter of just 2.6mm is ideal for applications requiring minimum visibility
• Ergonomic under-ear design-flexible, lightweight contoured loop hooks behind the ear for an ultra-secure, comfortable fit with or without glasses
• Comes equipped with AT8464 Dual-Ear Microphone Mount that converts single ear-worn MicroSet to a dual-ear-worn unit for maximum stability and comfort

American DJ Micro Galaxian Laser light $99.99

Light up any party with the Micro Galaxian laser. This green and red laser produces more than 200 beams that may be projected on a wall, ceiling or dance floor. Safe to use, this laser complies with FDA standards. The Micro Galaxian is easy to use – just plug it in and run the laser’s built-in lighting programs in Auto or Sound Active mode. Comes complete with a dual hanging bracket and a infrared remote control. The Micro Galaxian’s compact, light weight case design makes it ideal for mobile entertainers, bands, night clubs and bars or any party goers!
 
 Specifications:

- Produces more than 200 green and red laser beams that can be projected on a ceiling, wall or dance floor
- Compact case design
- 2 operational modes: Auto Mode (built-in programs), or Sound Active Mode
- Built-in programs can be changed with a push of a button on the unit or from an infrared remote
- Includes dual hanging bracket
- Complies with FDA standards                                                                                       
- Fan cooled
- Power consumption: 9W max
- Green Laser: 30mW (532nm) Green laser
- Red Laser: 80mW (650nm) Red laser
- Includes UL Listed multi-voltage power supply: AC 100-240V, 50/60Hz
- Includes Infrared Remote Control
[Auto/Sound Control; Black Out; Color Change (R, G, R+G, Random); Rotation Control (Clockwise/Counterclockwise/Random)]
- Dimensions (LxWxH): 2”x4.75”x3.5” / 50x120x90mm
- Weight: 2 lbs. / .6 kg.

 Specifications subject to change without notice

Manufacturer's Description for American DJ Reflex LED Moonflower Effect Light $179.99 blowout $99.99

American DJ SUNRAY TRI LED DMX $149.99 blowout $99.99

The Sunray Tri LED DMX Mirrorball Effect (120VAC) from American DJ is a terrific effect, with 35 brightly colored (Red, Blue, Green, Purple, White, Yellow, Cyan) beams of light produced by a 3W LED slowly rotate, filling a large space with beautiful color. The Sunray can be controlled in master/slave sound-active mode or in DMX mode (using 3 DMX channels). The 138° beam angle covers a very wide area. Low power consumption (13W) and very low heat output make this a very economical lighting effect to operate. This unit is supplied for use with 120VAC.

• Multi-Beam Tri Color LED High Output DMX Dome Effect
• Extremely Long Life (50,000 hr. rated)
• Rich, saturated colors that will not fade
• Very low power consumption
• Low heat output
• Razor sharp beams Revolutionary New Tri Color Technology that produces color-changing beams of LED light
• Superior optics produce Razor Sharp Beams across a dance floor or great effect on wall
• High output with new Tri Color LED technology-3-in-1 (RGB LED produces up to 7 colors)
• Colors Include: Red, Blue, Green, Purple, White, Yellow, Cyan
• Bright LED Sunray similar to a mirrorball effect
• Produces 34 crisp, bright color beams from one 3-Watt LED source
• Use with or without fog
• Beam Angle: 138°
• 3 DMX channels: Dimmer/Strobe; Color, Rotation: Clockwise & Counter Clockwise plus rotation speed, Color
• 2 operational modes: Master/slave sound active mode DMX mode
• Multi-voltage operation: AC 100~240V, 50/60Hz
• Power Consumption: 13W
• LED Wattage: 3W
• Light Source: 3W RGB LED 3-in-1
• Current Draw: 120V 015A/230V 0.07A
• Fan Cooled
• Can be Linked together by XLR cable
• Dimensions: 8-1/4"L x 8-1/4"W x 7"H
• 1-year Manufacturer's warranty

• LED DMX Moonflower Effect
• 224 sharp Red, Green & Blue high output colored beams (5mm LEDs: 88 Red, 48 Green & 88 Blue)
• Output similar to a 250W Halogen lamp
• Produces a wide coverage of LED patterns that can be projected on a dance floor or wall
• Easy-to-use - Operational by its own built-in light show (Sound active) or DMX-512 (USITT)
• High output with new lens technology
• Very low power consumption
• Extreme long lifetime of the LEDs (100,000 hr. rating)
• Linkable via 3-pin XLR DMX In/Output
• 4 DMX Channels
• LED DMX display with 4-button menu
• AC IEC outlet on rear to daisy chain power
• 1/4" plug on rear for use with American DJ UC3 universal controller
• Includes mounting brackets
• Power consumption: 48 Watts / 0.4 Amps
• Rich, saturated colors that will not fade
• Dimensions: 18-1/2"L x 14-3/4"W x 14-3/4"H
• 1-year Manufacturer's warranty
• $199.99

• Dual Output 400 Watt Fog Machine
• 3000 cubic feet per minute fog output
• Warm up time: 5 minutes
• 500ml Fog fluid tank
• External fog switch
• Wired remote included
• ETL and ETLC approved
• Dimensions: 11-1/2"L x 11"W x 7"H
• 1-year Manufacturer's warranty
• $79.99